Note
The available me duraon range is from 0 s to 600 s.
Alarm Duraon
If you have set the perimeter zone, you can set the me duraon of the alarm.
Note
The available me duraon range is from 1 s to 900 s.
5. Click Save.
4.3.4 Video Management
You can add two network cameras to the security control panel, and link the camera with the
selected zone for video monitoring. You can also receive and view the event video via client and
Email.
Add Cameras to the Security Control Panel
Steps
1. Click System → Network Camera to enter the network camera management page.
Figure 4-22 Network Camera Management
2. Click Add , and enter the basic informaon of the camera, such as IP address and port No., and
select the protocol type.
3. Enter the user name and password of the camera.
4. Click OK .
AX Security Control Panel
42