2. Tap
to enter the Scan QR Code page.
3. Tap Add Keyfob.
4. Follow the
instrucon on the page and press any key on the keyfob to add.
5. Create a name for the keyfob and tap Finish.
The keyfob is listed in the Wireless Device page.
6.
Oponal: You can view the keyfob's serial No. and you can also delete it.
4.4.7 User Management
Steps
1. On the device list page, tap the security control panel and then log in to the device (if required)
to enter the control panel page.
2. Tap
→ User Management → User .
Figure 4-36 User Managment
3. Tap Add User.
AX Security Control Panel
64
To Next Page
Loading...
Need help?
General
