Scheduled Tasks function is prior to Park Action function. When these two functions are set
at the same time, only the Scheduled Tasks function takes effect.
Pattern function varies depending on speed dome models.
Steps:
1. Enter the Park Action settings interface:
Configuration > PTZ > Park Action
Figure 7-28 Set the Park Action
2. Check the checkbox of Enable Park Action.
3. Set the Park Time as the inactivity time of the speed dome before it starts the park actions.
4. Choose Action Type the from the dropdown list.
Action Types
5. Select the Action Type ID from the dropdown list.
6. Click to save the settings.
7.3.4 Configuring Privacy Mask
Purpose:
Privacy mask enables you to cover certain areas on the live video to prevent certain spots in the
surveillance area from being live viewed and recorded.
Steps:
1. Enter the Privacy Mask settings interface:
Configuration > PTZ > Privacy Mask