HIKVISION DS-2TD4166-50-V2 User Manual

User Manual of Thermal Bi-spectrum Network Speed dome
© Hikvision
79
Chapter 7 Speed dome Configuration
7.1 Configuring Network Settings
The functions vary depending on the models of speed dome.
7.1.1 Basic Settings
Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the speed dome over network.
IPv4 and IPv6 are both supported.
Steps:
1. Enter TCP/IP settings interface:
Configuration > Network > Basic Settings > TCP/IP
Figure 7-1 TCP/IP Settings
2. Configure the NIC settings, including the IPv4(IPv6) Address, IPv4(IPv6) Subnet Mask and
IPv4(IPv6) Default Gateway.

HIKVISION DS-2TD4166-50-V2 Specifications

General

Brand	HIKVISION
Model	DS-2TD4166-50-V2
Category	Security Camera
Language	English