HIKVISION DS-2TD4166-50-V2 User Manual

User Manual of Thermal Bi-spectrum Network Speed dome
© Hikvision
109
7.4 Configuring Image Settings
 On the event configuration page, click to show the PTZ control panel or click to hide it.
 Click the direction buttons to control the pan/tilt movements.
 Click the zoom/iris/focus buttons to realize lens control.
 The functions vary depending on the models of speed dome.
7.4.1 Configuring Display Settings
Purpose:
You can set the image quality of the speed dome, including brightness, contrast, saturation,
sharpness, etc.
 The parameters in Display Settings interface vary depending on the models of speed dome.
 You can double click the live view to enter full screen mode and double click it again to exit.
Steps:
1. Enter the Display settings interface:
Configuration > Image> Display Settings
2. Select the channel No. from the dropdown list.
Figure 7-37 Display Settings
3. You can select the Scene in the dropdown list with different predefined image parameters.
4. Set the image parameters of the speed dome.

HIKVISION DS-2TD4166-50-V2 Specifications

General

Brand	HIKVISION
Model	DS-2TD4166-50-V2
Category	Security Camera
Language	English