Synchronously play recorded videos of different channels
Steps:
1. Click to enable synchronous playback function.
2. Choose camera channels.
3. Setting date and time of recorded videos.
4. Click to view the videos of optical channel and thermal channel synchronously.
Asynchronously play recorded videos of different channels
Steps:
1. Click to enable asynchronous playback function.
2. Choose Channel No: 1.
3. Setting date and time of recorded videos.
4. Choose Channel No: 2.
5. Setting date and time of recorded videos.
6. Repeat step 2-5 to configure the date and time for different channels separately.
7. Click to view the videos of optical channel and thermal channel asynchronously.
4.5.2 Downloading Video Files
Steps:
1. Click on the playback interface. The pop-up menu is shown in Figure 4-19.
2. Set the start time and end time. Click Search. The corresponding video files are listed on the
left.
Figure 4-19 Video Downloading interface
To Next Page
Loading...
Need help?
General
