HIKVISION DS-A80 Series Quick Operation Guide

Quick Operation Guide of DS-A81 Series Storage System
34
Chapter 6 Creation and Use of RAID
The system supports RAID (Redundant Array of Independent Disks) service which provides
redundant storage for the data on disks. When the RAID 5 is adopted, there will be no data loss in
case of one disk failure in this RAID group.
Before providing the network storage service by single physical disk or RAID group, add the single
physical hard disk or RAID group to a virtual storage pool, to work as the physical volume, and
then create LUNs (logical unit number) on the physical volume to for the NAS, CVR or iSCSI
service.
6.1 Logging in Basic Storage Management
System
Steps:
1. Input the IP address of the storage system in the address bar of the web browser, e.g.,
https://10.254.254.254:2004, and press the Enter key. A login window will pop up.
2. Select Basic as the login system from the drop-down list.
3. Input the user name web_admin and the default password 123, and select Advanced as the
mode.
4. Click the Login button to log in the Basic Storage Management system.
Figure 6. 1 Login
6.2 Disk Management
6.2.1 Viewing Disk List
Steps:
1. Enter the Disk Management interface (Storage > Disk). The hard disks will be displayed on a
list. You can view the disk information including the supplier, model, size, state and group.

HIKVISION DS-A80 Series Specifications

General

Brand	HIKVISION
Model	DS-A80 Series
Category	Storage
Language	English