HIKVISION DS-A80 Series Quick Operation Guide

Quick Operation Guide of DS-A81 Series Storage System
67
Example: If the IP address of the storage system is 172.8.72.241 and the NAS disk name is
NAS_disk1, then you should enter \\172.8.72.241\NAS_disk1 in the Folder text field.
Figure 8. 11 Map Network Drive Guide
3. Optionally, you can check the checkbox of Reconnect at logon to connect the NAS disk
automatically after the system startup.
4. Click the Finish button to confirm the settings. And then input the user name and password
of the NAS disk in the pop-up dialog box, and click OK.
Figure 8. 12 User Name and Password
5. After mapping the NAS disk to the network drive successfully, you can view the NAS disk in
the Network Location area of Computer.
Figure 8. 13 Connected NAS Disk
6. To disconnect the NAS disk, you can select Disconnect Network Drive on the Right-click Menu.
8.3 Cautions for Proper Use of NAS Disk
 Due to the system settings of Windows, one client can use only one NAS user to access the

HIKVISION DS-A80 Series Specifications

General

Brand	HIKVISION
Model	DS-A80 Series
Category	Storage
Language	English