HIKVISION DS-K1T342 Series User Manual

Figure 9-3 Time Sengs
Click Save to save the sengs aer the conguraon.
Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device me should be synchronized manually. You can set the device me
manually or check Sync. with Computer Time to synchronize the device me with the
computer's me.
9.5.4 Set DST
Steps
1.
Click Conguraon → System → System Sengs → DST .
Figure 9-4 DST Page
2.
Check Enable DST.
3.
Set the DST start me, end me and bias me.
DS-K1T342 Series Face Recognion Terminal User Manual
121

HIKVISION DS-K1T342 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T342 Series
Category	Touch terminals
Language	English