HIKVISION DS-KD7003EY-IME2 User Manual

Chapter 11 Login Web Browser
You can log into the Web browser for device conguraon.
Before You Start
You need to make sure the device is on AP mode. For more details, please refer to
Enable AP Mode
Steps
1.
Connect your mobile devices or PCs to the device hotspot.
2.
Enter the device user name and the
acvaon password. Click Login.
Note
The device will be acvated automacally aer powered on. You can check the acvaon
password via the label on the surface of the device.
3.
For the rst-me login, you need to change the acvaon password: Click admin → Modify
Password on the upper right of the Web browser page. Enter the old and new password and
conrm the new password. Click Save.
Note
The hotspot password will be changed simultaneously aer the acvaon password is changed.
DS-KD7003EY-IME2 Module Door Staon User Manual
57

HIKVISION DS-KD7003EY-IME2 Specifications

General

Brand	HIKVISION
Model	DS-KD7003EY-IME2
Category	Intercom System
Language	English