22.7 Set Sub Module on PC Web
You can congure the sub modules on PC Web.
Steps
1.
Click
Conguraon → Intercom → Sub Module Conguraon to enter the sengs page.
2.
Click Operaon to set sub module parameters.
1) Drag the block or enter the value of brightness.
2) Click to enable Buzzer.
3) Select the default home page of the sub module.
4) Add a call
buon. Click Add. Enter the name and call and click OK to save the sengs.
DS-KD7003EY-IME2 Module Door Staon User Manual
79