iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 19
• Error Correction: The resolution and bitrate stay the same as the set values on Video page. The
mode is used to correct the data error during transmission to ensure the image quality. You can set
the Error Correction Proportion within range of 0–100.
When the proportion is 0, the data error will be corrected by data retransmission. When the
proportion is higher than 0, the error data will be corrected via redundant data that is added to the
stream and data retransmission. The higher the value, the more redundant date will be generated,
the more data error would be corrected, but a larger bandwidth would be required. When the
proportion is 100, the redundant data will be as large as the original data, and twice the bandwidth
is required.
Be sure the bandwidth is sufficient in the Error Correction mode.
4. Save the settings.
To Next Page
Loading...
Need help?
General
