iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 37
2) Select the video files and then click Download.
Go to Configuration → Local, click Save downloaded files to to change the saving path of
downloaded video files.
Capture Configuration
The device can capture the pictures manually or automatically and save them in configured saving path.
You can view and download the snapshots.
Capture Automatically
This function can capture pictures automatically during configured time periods.
Before You Start
If event-triggered capture is required, configure related linkage methods in event settings. Refer to Event
and Alarm for event settings.
Steps
1. Go to Configuration → Storage → Schedule Settings → Capture → Capture Parameters.
2. Set the capture type.
• Timing: Capture a picture at the configured time interval.
• Event-Triggered: Capture a picture when an event is triggered.
3. Set the Format, Resolution, Quality, Interval, and Capture Number.
4. Refer to Set Arming Schedule for configuring schedule time.
5. Click Save.
Capture Manually
Steps
1. Go to Configuration → Local.
2. Set the Image Format and saving path to for snapshots.
• JPEG: The picture size of this format is comparatively small, which is better for network transmission.
• BMP: The picture is compressed with good quality.
3. Click Save.
4. Click
near the live view or play back window to capture a picture manually.
To Next Page
Loading...
Need help?
General
