iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 74
Restore and Default
Restore and Default helps restore the device parameters to the default settings.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance.
2. Click Restore or Default according to your needs.
• Restore: Reset device parameters, except user information, IP parameters, and video format to the
default settings.
• Default: Reset all the parameters to the factory default.
Be careful when using this function. After resetting to the factory default, all the
parameters are reset to the default settings.
Upgrade
Before You Start
CAUTION! You need to obtain the correct upgrade package.
DO NOT disconnect power during the process, and the device reboots automatically
after upgrade.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance.
2. Choose one upgrade method.
• Firmware: Locate the exact path of the upgrade file.
• Firmware Directory: Locate the directory which the upgrade file belongs to.
3. Click Browse to select the upgrade file.
4. Click Upgrade.
View Open Source Software License
1. Go to Configuration → System → System Settings → About Device, and click View Licenses.
Time and Date
You can configure time and date of the device by configuring time zone, time synchronization, and
Daylight Saving Time (DST).
To Next Page
Loading...
Need help?
General
