iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 34
2. Click Save.
eMMC Protection
If you enable eMMC protection, the lifespan of the eMMC is displayed.
Set Cloud Storage
It helps to upload the captured pictures and data to the cloud. The platform requests picture directly from
the cloud for picture and analysis. The function is supported only by certain models.
Steps
CAUTION! If cloud storage is enabled, the pictures are preferentially stored in the cloud
storage server.
1. Go to Configuration → Storage → Storage Management → Cloud Storage.
2. Check Enable Cloud Storage.
3. Set basic parameters.
• Protocol Version: The protocol version of the cloud storage server.
• Server IP: The IP address of the cloud storage server. It supports IPv4 address.
• Server Port: The port of the cloud storage server. 6001 is the default port and you are not
recommended to edit it.
• User Name and Password: The user name and password of the cloud storage server.
• Picture Storage Pool ID: The ID of the picture storage region in the cloud storage server. Make sure
storage pool ID and the storage region ID are the same.
4. Click Test to test the configured settings.
5. Click Save.
Video Recording
This part introduces the operations of manual and scheduled recording, playback, and downloading
recorded files.
Record Automatically
This function can record video automatically during configured time periods.
Before You Start
Select Trigger Recording in event settings for each record type except Continuous. See Event and Alarm
for details.
To Next Page
Loading...
Need help?
General
