HIKVISION iDS-2CD7A G0-IZH Series User Manual

iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 52
Figure 6-9 Set Rule
5. Optional: Repeat the above steps to set more regions.
6. For the arming schedule settings, see Set Arming Schedule. For the linkage method settings, see
Linkage Method Settings.
7. Click Save.
The function is supported only by certain models. The actual display varies by model.
Draw Area
This section introduces the configuration of area.
Steps
1. Click Draw Area.
2. Click on the live view to draw the boundaries of the detection region, and right click to complete
drawing.
3. Click Save.
Click Clear All to clear all pre-defined areas.
Set Size Filter
This part introduces setting the size filter. Only a target whose size is between the minimum value and
maximum value is detected and triggers alarm.
Steps
1. Click Max. Size, and drag the mouse in the live view to draw the maximum target size.
2. Click Min. Size, and drag the mouse in the live view to draw the minimum target size.
3. Click Save.

HIKVISION iDS-2CD7A G0-IZH Series Specifications

General

Brand	HIKVISION
Model	iDS-2CD7A G0-IZH Series
Category	Security Camera
Language	English