iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 68
Chapter 8 Arming Schedule and Alarm Linkage
Arming schedule is a customized time period in which the device performs certain tasks. Alarm linkage is
the response to the detected certain incident or target during the scheduled time.
Set Arming Schedule
Set the valid time of the device tasks.
Steps
1. Click Arming Schedule.
2. Drag the time bar to draw desired valid time.
Up to eight periods can be configured for one day.
3. Adjust the time period.
• Click on the selected time period, and enter the desired value. Click Save.
• Click on the selected time period. Drag the both ends to adjust the time period.
• Click on the selected time period, and drag it on the time bar.
4. Optional: Click Copy to... to copy the same settings to other days.
5. Click Save.
Linkage Method Settings
You can enable the linkage functions when an event or alarm occurs.
Trigger Alarm Output
If the device has been connected to an alarm output device, and the alarm output No. has been configured,
the device sends alarm information to the connected alarm output device when an alarm is triggered.
Steps
1. Go to Configuration → Event → Basic Event → Alarm Output.
2. Set alarm output parameters.
• Automatic Alarm: For the information about the configuration, see Automatic Alarm.
• Manual Alarm: For the information about the configuration, see Manual Alarm.
3. Click Save.
Manual Alarm
You can trigger an alarm output manually.
To Next Page
Loading...
Need help?
General
