iDS-2CD7xxG0-xxxxx Network Bullet Camera User Manual
UM iDS-2CD7xxG0-xxxxx 021021NA 16
Lens initialization is used on devices equipped with a motorized lens. The function can reset the lens
when long time zoom or focus results in blurred image. This function varies by model.
• Manual Lens Initialization: Click to operate lens initialization.
• Auto Lens Initialization: Go to Configuration → System → Maintenance → Lens Correction to enable this
function. You can set the arming schedule, and the device will correct the lens automatically during
the configured time periods.
Quick Set Live View
Offers quick setup of PTZ, display settings, OSD, video/audio, and VCA resource settings on live view page.
Steps
1. Click to show quick setup page.
2. Set PTZ, display settings, OSD, video/audio, and VCA resource parameters.
• For PTZ settings, see Lens Parameters Adjustment.
• For display settings, see Display Settings.
• For OSD settings, see OSD.
• For audio and video settings, see Video and Audio.
• For VCA settings, see Allocate VCA Resource.
This function is supported only by certain models.
Lens Parameters Adjustment
It is used to adjust the lens focus, zoom, and iris.
• Zoom
Click , and the lens zooms in.
Click , and the lens zooms out.
• Focus
Click , then the lens focuses far and the distant object gets clear.
Click , then the lens focuses near and the nearby object gets clear.
• PTZ Speed
Slide to adjust the speed of the pan/tilt movement.
• Iris
To Next Page
Loading...
Need help?
General
