Perimeter Protecon Analysis and Capture by Device
When perimeter protecon events are analyzed by the device, the device will send you 3
images with target frames and rule frames in the alarm triggered email.
Note
Perimeter Protecon Analysis and Capture by Device is only available for /X and /S series.
3. Oponal: Enable the alternate SMTP, and congure the required parameters for alternate SMTP.
When the preferred SMTP is invalid, the device will use alternate SMTP to send emails.
4. Oponal: Click Test to send a test email.
5. Click Apply.
12.6
Congure Port
You can congure dierent types of ports to enable relevant funcons.
Steps
1. Go to System → Network → Advanced → More Sengs .
Figure 12-5 Port Sengs
2. Congure port sengs as needed.
Alarm Host IP/Port
With a remote alarm host congured, the device will send the alarm event or excepon
message to the host when an alarm is triggered. The remote alarm host must have the client
Network Video Recorder User Manual
145