HIKVISION iDS-9664NXI-I8/16S - Chapter 12 Network Settings; 12.1 Configure DDNS; 12.2 Configure PPPoE

3.3 Congure Auto-Switch of Cameras
You can set the auto-switch of cameras to play in dierent display modes.
Steps
1. Go to System → Live View → General .
2. Set Video Output Interface, Live View Mode, and Dwell Time.
Video Output Interface
Select the video output interface.
Live View Mode
Select the display mode for live view, e.g., 2*2, 1*5, etc.
Dwell Time
The
me in seconds to dwell between switching of cameras when enabling auto-switch. The
range is from 5s to 300s.
3. Go to View Sengs to set the view layout.
4. Click OK to save the
sengs.
3.4
Congure Live View Layout
Live view displays the video image geng from each camera in real me.
3.4.1
Congure Custom Live View Layout
Steps
1. Go to System → Live View → View .
2. Click Set Custom Layout.
3. Click
on the Custom Layout Conguraon interface.
4. Edit the layout name.
5. Select a window division mode from the toolbar.
Network Video Recorder User Manual
24