Time Threshold
The me of the target staying in the region. If the value is 10, an alarm is triggered aer
the target has stayed in the region for 10 s. Range: [1-10].
3) Set Sensivity.
Sensivity
Similarity of the background image to the object. The higher the value is, more easily the
detecon alarm will be triggered.
7. Set the arming schedule. Refer to Congure Arming Schedule .
8. Set the linkage
acons. Refer to Congure Linkage Acons .
9. Click Apply.
6.2.5 People Gathering
Detecon
People gathering detecon is used to detect whether the density of human bodies within a
specied area exceeds the set value and trigger alarm for linked acons.
Steps
1. Go to Smart Analysis → Smart Event Sengs → Other Events .
2. Select a camera.
3. Click People Gathering.
Figure 6-5 People Gathering Detecon
4. Check Enable People Gathering Detecon.
5.
Oponal: Check Save VCA Picture to save the captured people gathering detecon pictures.
6. Set people gathering detecon parameters.
1) Select Arming Area.
Network Video Recorder User Manual
65
To Next Page
Loading...
Need help?
General
