45
Installing a Battery Pack
Charging time
Instrument
The battery icon on the screen will turn red when the battery life declines while the instrument is
being powered by a Battery Pack. If this mark is displayed, connect the Z1014 AC Adapter and
charge the battery.
Approximate time from when the instrument’s battery icon turns red until the battery has no
remaining charge (reference value)
• Approx. 10 min. (with four plug-in modules connected while saving waveform data in real time to
an SD Memory Card, backlight brightness of 5 [maximum brightness], backlight saver o, 23°C)
Wireless modules
If the Battery Pack starts to run out while the wireless module is working on Battery Pack power,
the battery (BATT) LED that remains on will start blinking.
Rough continuous operating time after the battery LED starts blinking (reference value)
• Approx. 30 min. (at an ambient temperature of 23°C)
Making Connections (Preparing for Measurement)
To Next Page
Loading...
Need help?
General
