23
HITRON CVE-30360 USER’S GUIDE
INTRODUCTION
NOTE: The Username and Password are case-sensitive; “admin” is not the same as
“Admin”.
4 Click Login. The System Info screen displays (see The System Info Screen on
page 30).
1.6 GUI OVERVIEW
This section describes the CVE-30360’s GUI.
FIGURE 5: GUI Overview
1.7 RESETTING THE CVE-30360
When you reset the CVE-30360 to its factory defaults, all user-configured settings are
lost, and the CVE-30360 is returned to its initial configuration state.
There are two ways to reset the CVE-30360:
TABLE 3: GUI Overview
Primary
Navigation Bar
Use this section to move from one part of the GUI to another.
Secondary
Navigation Bar
Use this section to move from one related screen to another.
Main Window Use this section to read information about your CVE-30360’s
configuration, and make configuration changes.