HITRON CVE-30360 USER’S GUIDE
FIREWALL
The following table describes the labels in this screen.
4.3 THE MAC FILTERING SCREEN
Use this screen to configure Media Access Control (MAC) address filtering on the
LAN.
NOTE: To configure MAC address filtering on the wireless network, see The Access
Control Screen on page 82.
You can set the CVE-30360 to allow only certain devices to access the CVE-30360
and the network, or to deny certain devices access.
NOTE: To see a list of all the computers connected to the CVE-30360 on the LAN,
click the Connected Computers button in the Firewall > IP Filtering,
Forwarding, Port Triggering or Firewall Options screens.
Click Firewall > MAC Filtering. The following screen displays.
TABLE 14: The Firewall > Firewall Options Screen
Intrusion Detection
System
Select this to turn the intrusion detection system off.
Deselect this to turn the intrusion detection system
on.
Ping on WAN Interface
Select this to prevent responses to ICMP requests
originating from the WAN.
Select this to allow responses to ICMP requests
originating from the WAN.
Enable DMZ Host Use this field to turn the DMZ on or off.
Select the checkbox to enable the DMZ.
Deselect the checkbox to disable the DMZ.
Computers that were previously in the DMZ are now
on the LAN.
Connected Computers Click this to see a list of the computers currently
connected to the CVE-30360 on the LAN.
[...] IP Address [...] Enter the IP address of the computer that you want to
add to the DMZ.
Apply Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
To Next Page
Loading...
Need help?
General
