13
CONTROLS AND FEATURES
CONTROLS
Emergency Stop Switch Clip
and Emergency Stop Switch
The emergency stop switch clip must
be inserted in the emergency stop
switch in order for the engine to start
and run. The emergency stop switch
lanyard must be attached securely to
the operator or to the operator’s PFD
(Personal Flotation Device).
When used as described, the
emer
gency stop switch and
emergency stop switch lanyard
system stops the engine if the
operator falls away from the controls.
A spare emergency stop switch clip is
provided in
the tool bag (p. 39).
Choke Knob
The choke knob opens and closes the
choke valve in the carburetor.
The ON position enriches the fuel
mixture for
starting a cold engine.
The OFF position provides the
correct fue
l mixture for operation
after starting, and for restarting a
warm engine.
EMERGENCY STOP SWITCH
EMERGENCY STOP
SWITCH CLIP
EMERGENCY STOP SWITCH LANYARD
EMERGENCY STOP
SWITCH CLIP
EMERGENCY STOP
SWITCH LANYARD
CHOKE KNOB
ON
OFF
31ZW66320.book 13 ページ ２０１３年１０月４日 金曜日 午後３時４８分
To Next Page
Loading...
Need help?
General
