Honda BF2.3D - ENGINE COVER REMOVAL AND INSTALLATION; Engine Oil Level Check

40
SERVICING YOUR OUTBOARD MOTOR
MAINTENANCE SCHEDULE
Follow the MAINTENANCE SCHEDULE table and service your outboard motor accordingly. Please note, a claim for
warranty coverage will not be denied simply because the maintenance schedule for your outboard motor was not
followed. However, any part(s) that fails specifically due to lack of maintenance, or improperly performed maintenance,
would not be covered under the Distributor’s Limited Warranty.
(2) These items should be serviced by your servicing dealer, unless you have the proper tools and are mechanically proficient. Refer to the
Honda shop manual for service procedures. See “Honda Publications” on page 71 for ordering information.
(3) For professional commercial use, log hours of operation to determine proper maintenance intervals.
Each use
First month
or
10 hrs.
Every 6 months
or
50 hrs.
Every year
or
150 hrs.
Engine oil Check level o
Change o o
Gear case oil Change o o
Starter rope Check o
Carburetor linkage Check-adjust o (2) o (2)
Valve clearance Check-adjust o (2)
Spark plug Check-adjust/Replace o
Propeller and Cotter pin Check o
Anode Check o
Idling speed Check-adjust o (2) o (2)
Clutch shoes and drum
(With clutch type)
Check o (2)
REGULAR SERVICE PERIOD (3)
Perform at every indicated month or
operating hour interval, whichever
comes first.
ITEM
31ZW66320.book 40 ページ ２０１３年１０月４日 金曜日 午後３時４８分