Commissioning of a Standalone System Setup
Ensite Pro to CIU 888 Migration Manual Part No.: 4417593_Rev09
2 - 12 CIU 888
2.3.4 Generating INI files
When the site configuration has been set up according to one of the
supported topologies of deployment, the next step is to generate the
INI files needed for Entis Pro.
Refer to the Instruction manual Ensite Pro Configuration Tool version
3.0 (Part No. 4416593) for detailed information about generating
INI files using Ensite Pro.
2.4 Uploading the site configuration to the CIU 888
When the site configuration has been set up and the INI files have been
generated, the next step is to upload the site configuration to the
CIU 888 using the Ensite Pro to CIU 888 Migration tool.
1. Launch the Ensite Pro to CIU 888 Migration tool.
The Ensite Pro to CIU 888 Migration tool is launched.
FIGURE 2-11 Ensite Pro to CIU 888 Migration tool
2. Enter the following information:
Ensite Pro Site Database File
Select the Ensite Pro site database file (*.mdb file). Click
(Browse) to browse to the appropriate folder and select the *.mdb
file.
After selecting the Ensite Pro site database file, the file name
including the full path is displayed.
To Next Page
Loading...
Need help?
General
