Updating CIU 888 Site configuration
Part No.: 4417593_Rev09 Ensite Pro to CIU 888 Migration Manual
CIU 888 4 - 3
2. Click (Select Site) in the Ensite Pro tool bar.
The Select Site window is displayed (see FIGURE 4-3).
FIGURE 4-3 Select Site window
3. Select the site from the list. Next, click Select.
All buttons in the Ensite Pro tool bar will become active (see
FIGURE 4-4).
FIGURE 4-4 Ensite Pro: Tool bar - All buttons are active
4. Implement the required changes to the site configuration.
Refer to the Instruction manual Ensite Pro Configuration Tool version
3.0 (Part No. 4416593) for detailed information about the complete
configuration procedure in Ensite Pro.
4.3 Regenerating the INI files
When the required changes in the site configuration have been
implemented, the next step is to regenerate the INI files needed for
Entis Pro. Refer to the Instruction manual Ensite Pro Configuration Tool
version 3.0 (Part No. 4416593) for detailed information about
generating INI files using Ensite Pro.
To Next Page
Loading...
Need help?
General
