Commissioning of a Redundant System Setup
Part No.: 4417593_Rev09 Ensite Pro to CIU 888 Migration Manual
CIU 888 3 - 15
3.6 End commissioning of the primary CIU 888
When the additional configuration settings of the primary CIU 888 have
been configured, the next step is to end commissioning of the primary
CIU 888. See section 2.6 for more information.
3.7 Commissioning of the secondary CIU 888
When the primary CIU 888 has been commissioned, the next step is to
configure its counterpart as preferred secondary CIU 888.
Procedure:
1. On the display of the secondary CIU 888, highlight the
Configuration icon in the Status Dashboard using the navigation
keys. Next, press the OK button.
The Configuration menu screen is displayed (see FIGURE 3-14).
FIGURE 3-14 CIU 888 display: Configuration menu screen
2. Highlight the Redundancy option using the navigation keys. Next,
press the OK button.
The Redundancy screen is displayed (see FIGURE 3-15).
FIGURE 3-15 CIU 888 display: Redundancy screen
To Next Page
Loading...
Need help?
General
