Honeywell Enraf SmartRadar FlexLine User Manual

Safety SmartRadar FlexLine
Installation Guide Part No.: 4417.760_Rev06
10
2.9 Accordance to Regulations
2.9.1 Device without SmartConn
2.9.2 Device with SmartConn
2.10 Compliance to FCC, R&TTE, IC
This device complies with EN 302372 of the R&TTE Directive,
Part 15 of the FCC Rules, and RSS-Gen of IC. The device does
not cause harmful interference and accepts any interference
received.
Protection
type
Certificate numbers
ATEX / IEC Ex
/ CSA
• SmartRadar FlexLine: KEMA 07ATEX0010X and IECEX KEM 07.0003 X
• SmartView: KEMA 07ATEX0011X and IECEX KEM 07.0004 X
• SmartConn: KEMA 07ATEX0093 and IECEX KEM 07.0031
• Without SmartView: Ex d [ia] T6 Ta: -40 °C - +65 °C
• With SmartView: Ex d [ia] ia T4 Ta: -25 °C - +65 °C
FM • Without SmartView:
Class Ι DIV Ι group C,D T6 NEMA 4X Ta: -40 °C - +65 °C
• With SmartView: Class Ι DIV Ι group C,D T4 NEMA 4X Ta: -25 °C - +65 °C
CSA • Without SmartView:
Class Ι DIV Ι group C,D T6 NEMA 4X Ta: -40 °C - +65 °C.
• With SmartView:
Class Ι DIV Ι group C,D T4 NEMA 4X Ta: -25 °C - +65 °C.
Protection
type
Certificate numbers
ATEX / IEC Ex
/ CSA
• Without SmartView: Ex de [ia] T6 Ta: -40 °C - +65 °C
• With SmartView: Ex de [ia] ia T4 Ta: -25 °C - +65 °C
WARNING!
Changes or modifications made to this equipment not
approved by Honeywell Enraf invalidate the R&TTE/
FCC/IC authorization to operate this equipment.

Honeywell Enraf SmartRadar FlexLine Specifications

General

Brand	Honeywell
Model	Enraf SmartRadar FlexLine
Category	Radar
Language	English