Honeywell ESSER FACP User Manual

Periphery components for ESSER FACP
56 TI 798960.GB0 / 04.20
8.2 System requirements
To use the IQ8Wireless components to the FACP the esserbus
®
or powered loop function is needed.
IQ8
Control
FACP
IQ8Wireless gateway
IQ8
Wireless
transponder
IQ8Wireless detector base
IQ8Wireless Interface
esserbus
®
/ esserbus
®
PLus
Fig. 37: IQ8Wireless components on the loop
8.3 Batteries for IQ8Wireless devices
The IQ8Wireless devices must be powered only with the recommended and approved lithium batteries
(Part No. 805597).
The battery lifetime relates to the inserted fire alarm detector and the ambient temperature. In best case a
battery lifetime up to 3 years may be achieved.
The charging status of the battery will be temporarily and automatically proofed. If the battery charging voltage
drops under the required value an appropriate message is displayed at the Fire Alarm Control Panel. The
batteries must be replaced within 14 days.
Observe the information on use of batteries in the "IQ8Wireless transponder for wall mounting"
documentation (Part No. 798941.10).

Honeywell ESSER FACP Specifications

General

Brand	Honeywell
Model	ESSER FACP
Category	Fire Alarms
Language	English