Honeywell Genesis 7580G User Manual

7 - 2
Checkpoint
EAS Controller Settings
The following switch settings for a Checkpoint Counterpoint IX controller can be used as a starting point, however, these
settings should be tuned according to your particular installation.
EAS Controller
Scan one of the following bar codes to turn EAS On or Off. Default = Off.
EAS Mode of Operation
Scan one of the following bar codes to select the EAS mode you wish to use.
When Interlocked is selected, EAS tag deactivation is interlocked with bar code scanning and transmission. When using Inter-
locked, you must set the timeout (see below).
When Continuous on Enable is selected, EAS tag deactivation is on all the time.
Default = Interlocked.
On
1 2 3 4 5 6
SW2
On
1 2 3 4 5 6
SW1
* Off
On
* Interlocked
Continuous on Enable

Honeywell Genesis 7580G Specifications

General

Type	Fixed bar code reader
Sensor type	-
Scanner type	1D/2D
Pitch reading angle	-70 - 70 °
Motion tolerance (cm/s)	200
Light levels (direct sunlight)	0 - 100000 lx
Standard interfaces	USB, RS-232, RS-485, Keyboard wedge
Product color	Black, Silver
Input voltage	5.5 V
Power consumption (standby)	0.5 W
Power consumption (typical)	2 W
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	80 mm
Width	83 mm
Height	150 mm
Weight	340 g