36 LDM Series Instruction Manual — P/N 15885:H3 8/12/2019
System 5000 (UL 8th) AIM-200 Point Annunciation
Alarm and Trouble With 8-Point Shift
Notes:
1. It is assumed that systems with 8-Point Shift selected will be 56 zones/points or less.
2. Circuit corresponds to a specific I/O module installed in user configured System 5000.
3. With 8-Point Shift, the first 8 optional control switches move to the 3rd LDM-E32. The 8 CPU switch functions are assigned to
Circuits 57 through 64 as shown in the table above.
LDM Switch
Position
LDM-32 1st LDM-E32 2nd LDM-E32 3rd LDM-E32
1 Circuit 1 Circuit 17 Circuit 33 Circuit 49
2 Circuit 2 Circuit 18 Circuit 34 Circuit 50
3 Circuit 3 Circuit 19 Circuit 35 Circuit 51
4 Circuit 4 Circuit 20 Circuit 36 Circuit 52
5 Circuit 5 Circuit 21 Circuit 37 Circuit 53
6 Circuit 6 Circuit 22 Circuit 38 Circuit 54
7 Circuit 7 Circuit 23 Circuit 39 Circuit 55
8 Circuit 8 Circuit 24 Circuit 40 Circuit 56
9 Circuit 9 Circuit 25 Circuit 41 ACK
10 Circuit 10 Circuit 26 Circuit 42 SIG.SIL.
11 Circuit 11 Circuit 27 Circuit 43 RESET
12 Circuit 12 Circuit 28 Circuit 44 not used
13 Circuit 13 Circuit 29 Circuit 45 NAC 1
14 Circuit 14 Circuit 30 Circuit 46 NAC 2
15 Circuit 15 Circuit 31 Circuit 47 MUN TIE
16 Circuit 16 Circuit 32 Circuit 48 Alarm Relay
Table B.4 LDM Switch Control Functions
To Next Page
Loading...
Need help?
General
