HP 2530 User Manual

Causes for client deauthentication immediately after authenticating
Table 12 Causes for client deauthentication
CauseResult
ACE formatted incorrectly
in the RADIUS server
• ‘from’, ‘any’, or ‘to’ keyword missing.
• An IPv4 or IPv6 protocol number in the ACE exceeds 255.
• An optional UDP or TCP port number is invalid, or a UDP/TCP port number is specified
when the protocol is neither UDP or TCP.
A RADIUS-assigned ACL
limit has been exceeded
• An ACE in the ACL for a given authenticated client exceeds 80 characters.
• The TCP/UDP port-range quantity of 14 per slot or port group has been exceeded.
• The rule limit of 3048 per slot or port group has been exceeded.
The HP-Nas-Rules-IPv6 attribute is missing or HP-Nas-Rules-IPv6=2 is configured.
See Table 10 (page 42) for more on this attribute.
An IPv6 ACE has been
received on a port and
either:
56 Updates for the HP Switch Software Access Security Guide

HP 2530 Specifications

General

Brand	HP
Model	2530
Category	Switch
Language	English