HP 5315 A User Manual

Model 5315A/ S
Adjustments
SECTION V
ADJUSTMENTS
5-1. INTRODUCTION
5-2_ This section describes the adjustments required to maintain the 5315A1B operating
characteristics within specification s_ Adjustments shou ld be made when required, such as after a
performance test failure or when co
mponents are replac ed that ma y affect an adjustment
5-3. Table 5-1 is a li st of all adjusta bl e components in the 5315A / B and indicates the order in
which adjustments should be performed.
5-4. EQUIPMENT REQUIRED
5-5. The test equipment required for the ad justment procedure s is listed in Table 5- 1, Recom-
mended Test Equipment. Substitute in st ruments may be used if they meet the critical
specifications.
5-6. FACTORY SELECTED COMPONENTS
5- 7. Th ere are no factory sel ected compo nents in the standard 53 15A/ B.
5-8. ADJUSTMENT LOCATIONS
5- 9. Figures 5-1,5- 2, and 5-3 illu st rate the location of all adjustments and test points used in the
5315A /S adjust ment procedures.
WARNING
MAINTENANCE DESCRIBED HEREIN IS PERFORMED WITH
POWER SUPPLIED
TO THE INSTRUMENT, AND PROTECTIVE
COVERS REMOVED.
SUCH MAINTENANCE SHOULD BE PER-
FORMED ONLY BY SERVICE-TRAINED PERSONNEL WHO ARE
AWARE OF THE HAZARDS INVOLVED (FOR EXAMPLE, FIRE
AND ELECTRICAL SHOCK). WHERE MAINTENANCE CAN BE
PERFORMED WITHOUT POWER APPLIED, THE POWER
SHOULD BE REMOVED.
BEFORE ANY REPAIR IS COMPLETED, ENSURE THAT ALL
SAFETY FEATURES ARE INTACT AND FUNCTIONING, AND
THAT ALL NECESSARY PARTS ARE CONNECTED TO THEIR
PROTECTIVE
GROUNDING MEANS.
5-1

HP 5315 A Specifications

General

Brand	HP
Model	5315 A
Category	Cash Counter
Language	English