Model 5328A
Installation
2-22.
If the counter
is
being returned to Hewlett-Packard for service, attach
a
tag indicating the
type of service required, return address, model number, and full serial number. Mark the
container FRAGILE to assure careful handling.
2-23.
In any correspondence refer to the counter by model number and full serial number.
2-24. Other Packaging
Methods
2-25.
If
factory packaging
is
not available, good commercial packing should be used. Contract
packaging companies in many cities can provide dependable custom packaging on short notice.
The following general instructions should be followed when repackaging with commercially
available materials.
a.
If shipping to
a
Hewlett-Packard Service Office orservicecenter, attach
a
tag indicating
the type of service required, return address, model number, and full serial number.
b. Wrap the counter in heavy paper or plastic.
c.
Use
a
strong shipping container. A double-wall carton made of 350-pound test material
is adequate.
d.
Use enough shock-absorbing material (3- to4-inch layer) around all sidesof thecounter
to provide
a
firm cushion and prevent movement inside the container. Protect the
control panel with cardboard.
e.
Seal the shipping container securely.
2-26. STORAGE
2-27. If the counter
is
to be stored for an extended period of time, it should be enclosed in a
clean, dry, sealed container. See specifications in Section I for storage environmental limitations.
2-28. OPTIONS INSTALLATION
2-29.
Instructions for field installation of each option (listed in paragraph 1-17) arecontained in
the Installation and Service Manual for each option, with the exception of Option 010, High
Stability Time Base. Field installation instructions for Option 010 are provided in Section
V
of the
5328A Service Manual.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
