Trap
number
Trap name Description
1020 cpqSePciDeviceRemovedOrPoweredOff A PCI device was removed or powered
off.
2014 cpqSiIntrusionInstalled System intrusion hardware installed.
2015 cpqSiIntrusionRemoved System intrusion hardware removed.
2016 cpqSiHoodReplaced System hood replaced.
2017 cpqSiHoodRemovedOnPowerOff System hood removed when server
power was off.
3033 cpqDa6CntlrStatusChange A change has been detected in the
status of the Smart Array controller.
3034 cpqDa6LogDrvStatusChange A change has been detected in the
status of a Smart Array logical drive.
3038 cpqDa6AccelStatusChange A change has been detected in the
status of a Smart Array cache module.
3039 cpqDa6AccelBadDataTrap The Smart Array cache module has
lost backup power.
3040 cpqDa6AccelBatteryFailed The Smart Array cache module backup
power has failed.
3046 cpqDa7PhyDrvStatusChange A change has been detected in the
status of a Smart Array physical drive.
3047 cpqDa7SpareStatusChange A change has been detected in the
status of a Smart Array spare drive.
3049 cpqDaPhyDrvSSDWearStatusChange A change has been detected in the
SSD wear status of a Smart Array
physical drive.
6026 cpqHe3ThermalConfirmation The server was shut down due to a
thermal anomaly and is now
operational.
6027 cpqHe3PostError One or more POST errors have
occurred.
6032 cpqHe3FltTolPowerRedundancyLost The fault-tolerant power supplies have
lost redundancy for the specified
chassis.
6033 cpqHe3FltTolPowerSupplyInserted A fault-tolerant power supply has been
inserted.
Table Continued
Configuring iLO management settings 285
To Next Page
Loading...
Need help?
General