Trap
number
Trap name Description
6034 cpqHe3FltTolPowerSupplyRemoved A fault-tolerant power supply has been
removed.
6035 cpqHe3FltTolFanDegraded The fault-tolerant fan condition has
been set to Degraded.
6036 cpqHe3FltTolFanFailed The fault-tolerant fan condition has
been set to Failed.
6037 cpqHe3FltTolFanRedundancyLost The fault-tolerant fans have lost
redundancy.
6038 cpqHe3FltTolFanInserted A fault-tolerant fan has been inserted.
6039 cpqHe3FltTolFanRemoved A fault-tolerant fan has been removed.
6040 cpqHe3TemperatureFailed Temperature exceeded on the server.
6041 cpqHe3TemperatureDegraded The temperature status has been set to
Degraded, and the temperature is
outside the normal operating range.
Depending on the system
configuration, this system might be
shut down.
6042 cpqHe3TemperatureOk The temperature status has been set to
OK.
6048 cpqHe4FltTolPowerSupplyOk The fault-tolerant power supply
condition has been reset to OK.
6049 cpqHe4FltTolPowerSupplyDegraded The fault-tolerant power supply
condition has been set to Degraded.
6050 cpqHe4FltTolPowerSupplyFailed The fault-tolerant power supply
condition has been set to Failed.
6051 cpqHeResilientMemMirroredMemoryEngaged The Advanced Memory Protection
subsystem has detected a memory
fault. Mirrored Memory has been
activated.
6054 cpqHe3FltTolPowerRedundancyRestore The fault-tolerant power supplies have
returned to a redundant state.
6055 cpqHe3FltTolFanRedundancyRestored The fault-tolerant fans have returned to
a redundant state.
6061 cpqHeManagementProcInReset The management processor is
resetting.
Table Continued
286 Configuring iLO management settings
To Next Page
Loading...
Need help?
General