Trap
number
Trap name Description
6062 cpqHeManagementProcReady The management processor is ready.
6064 cpqHe5CorrMemReplaceMemModule Memory errors have been corrected.
Replace the memory module.
6069 cpqHe4FltTolPowerSupplyACpowerloss The fault-tolerant power supply in the
specified chassis and bay reported AC
power loss.
6070 cpqHeSysBatteryFailed The HPE Smart Storage Battery has
failed.
6071 cpqHeSysBatteryRemoved The HPE Smart Storage Battery has
been removed.
6072 cpqHeSysPwrAllocationNotOptimized iLO could not determine the power
requirements. The server power
allocation is not optimized.
6073 cpqHeSysPwrOnDenied The server could not power on
because the hardware cannot be
identified.
6074 cpqHePowerFailureError A device power failure has been
detected.
6075 cpqHeInterlockFailureError A device is missing or improperly
seated on the system board.
8029 cpqSs6FanStatusChange The storage enclosure fan status
changed.
8030 cpqSs6TempStatusChange The storage enclosure temperature
status changed.
8031 cpqSs6PwrSupplyStatusChange The storage enclosure power status
changed.
8032 cpqSsConnectionStatusChange The storage enclosure status changed.
9001 cpqSm2ServerReset The server power has been reset.
9003 cpqSm2UnauthorizedLoginAttempts The maximum unauthorized login
attempt threshold has been exceeded.
9005 cpqSm2SelfTestError iLO 5 detected a self test error.
9012 cpqSm2SecurityOverrideEngaged iLO 5 detected that the security
override jumper has been toggled to
the engaged position.
Table Continued
Configuring iLO management settings 287
To Next Page
Need help?
General