HP Integrity BL860c i2 User Manual

4. Close the lever to lock the drive into place.
Installing internal components
Removing the access panel
1. Lift the access panel latch.
2. Slide the access panel backwards approximately 2 cm (0.75 in).
3. Remove the access panel by lifting it straight up and off the server blade.
After the access panel is off, you can do the following:
• Add an additional processor (“Processor and heatsink module”).
• Add additional memory DIMMs (“DIMMs”).
• Add additional mezzanine cards (“Mezzanine cards”).
Installing internal components 43

HP Integrity BL860c i2 Specifications

General

Brand	HP
Model	Integrity BL860c i2
Category	Server
Language	English