HP Integrity rx8640 Deployment Guide

hwdisc
Synopsis
hwdisc -f[path]filename
Description
The hwdisc utility provides an inventory of the server being configured or captured. The hwdisc
utility is executed by the server configuration script and captures the following information:
• System Name
• Serial Number
• Asset Tag
• EFI Firmware version
• BMC Firmware version
• MP Firmware version
• Number of Cells
• Total RAM size
• Number of Processors
• PCI devices present in the system
Options
Table 5-17 hwdisc Options
ResultCommand line input
This argument specifies the location and name of the hwdisc data file. If [path]
is unspecified, the utility assumes that filename is in the current working directory.
If no file is specified, the utility generates a file in the current directory utilizing
the default name “hwdisc.dat.”
-f
This command generates the file hwdisc.xml in the /mnt/data location.hwdisc
-f/mnt/data/hwdisc.xml
This command generates the file hwdisc.dat in the current directory.hwdisc
Example
hwdisc –f/mnt/data/hwdisc.xml
This command generates the file hwdisc.xml in the /mnt/data location.
A typical file generated by the hwdisc command is similar to the following:
<HWDiscovery version=”1.0”>
<ServerInformation>
<SystemName>Server rx2620</SystemName>
<SerialNumber>52JAPE4343073100</SerialNumber>
<AssetTag>rx2620<AssetTag>
<EFIFw>1.10</EFIFw>
<BMCFw>01.56</BMCFw>
<MPFw>E.02.26</MPFw>
<Cells>1</Cells>
<Ram>512</Ram>
<Processors>2</Processors>
<PCIDevices>
<PCIDevice num=”0”>
<Bus>0</Bus>
<Device>3</Device>
<Function>0</Function>
<Id>10024752</Id>
94 Utilities Reference

HP Integrity rx8640 Specifications

General

Brand	HP
Model	Integrity rx8640
Category	Server
Language	English