6-79
RADIUS Authentication, Authorization, and Accounting
Creating Local Privilege Levels
Displaying Command Authorization Information
To display information about users and command authorization for command
groups, enter this command.
Figure 6-37. Example Showing Command Information for all Groups
Syntax: show authorization group [group-name]
Displays information about users and command
authorization for command groups.
Specifying the group parameter without any group names
displays information for all configured groups.
HP Switch(config)# show authorization group
Local Management Groups - Authorization Information
Group Name: Redgroup
Username
----------------
User1
User2
Sequence # | Permission Command Expression Log
---------- + ---------- ------------------------------------------ -------
100 | Permit configure Disable
200 | Permit vlan * Disable
Group Name: Bluegroup
Username
----------------
User3
Sequence # | Permission Command Expression Log
---------- + ---------- ------------------------------------------ -------
100 | Permit configure Disable
200 | Permit telnet Disable
300 | Permit menu Disable
To Next Page
Loading...
Need help?
General
