HP MSR2000 Series User Manual

4
 Place the removed memory module, CF card, or interface module on an antistatic workbench, with
the face upward, or put it into an antistatic bag.
 Touch only the edges, instead of electronic components when you observe or move a removed
memory module, CF card, or interface module.
To attach an ESD-preventive wrist strap:
1. Wear the wrist strap on your wrist.
2. Lock the wrist strap tight around your wrist to keep good contact with the skin.
3. Insert the ESD-preventive plug into the ESD-preventive socket.
4. Make sure the rack is well grounded.
CAUTION:
Check the resistance of the ESD-preventive wrist strap for safety. The resistance readin
g
should be in the
range of 1 to 10 megohm (Mohm) between human body and the ground.
EMI
All electromagnetic interference (EMI) sources, from outside or inside of the router and application system,
adversely affect the router in a conduction pattern of capacitance coupling, inductance coupling,
electromagnetic wave radiation, or common impedance (including grounding system) coupling. To
prevent EMI, follow these guidelines:
 Take measures against interference from the power grid.
 Do not use the router together with the grounding equipment or lightning-prevention equipment of
power equipment, and keep the router far away from them.
 Keep the router far away from high-power radio launchers, radars, and equipment with high
frequency or high current.
 Use electromagnetic shielding when necessary.
Lightning protection
To better protect the MSR3000 router from lightning, do as follows:
 Make sure the grounding cable of the chassis is well grounded.
 Make sure the grounding terminal of the AC power receptacle is well grounded.
 Install a lightning arrester at the input end of the power supply to enhance the lightning protection
capability of the power supply.
 Install a special lightning arrester at the input end of outdoor signal lines (for example, E1/T1 line)
to which interface modules of the router are connected to enhance the lightning protection
capability.
Rack-mounting
Before mounting the router in a standard 19-inch rack, adhere to the following requirements:
 The rack is equipped with a good ventilation system.
 The rack is sturdy enough to support the router and its accessories.

HP MSR2000 Series Specifications

General

Brand	HP
Model	MSR2000 Series
Category	Network Router
Language	English