Specifications and Regulatory Information
Hardware and Software Specifications
130 Reference Guide
Exit Menu
Saving Changes and
Exit
Saves Setup changes to CMOS,
exits, and reboots.
Discarding Changes
and Exit
Discards Setup changes since last
save, exits, and reboots. Does not
affect security, date, or time changes.
Get Default Values Restores default settings, stays in
Setup. Does not affect security, date,
or time changes.
Load Previous Values Discards Setup changes since last
save, stays in Setup. Does not affect
security, date, or time changes.
Save Changes Saves Setup changes to CMOS and
stays in Setup. Security settings are
saved when changed.
Hardware specifications
Dimensions 13.03"x10.72"x1.59" (331x272.3x40.5mm) for 12.1"–14.1"
13.46"x10.92"x1.65" (342x276.6x42.0mm) for 15"
Weight 6.5lbs (3.0kg) with 12.1" TFT LCD/LiIon battery/FDD/CD-ROM/64MB/HDD
CPU Intel PIII/Celeron uPGA2 with SpeedStep (PIII only)
100MHz FSB
Chip Set Intel 440ZXM-100
Main Memory 100MHz SDRAM (PC100)
Maximum memory upgrade to 256MB by two 128MB SODIMM (144-pin/3.3V)
modules in two 1.25" slots
Hard Disk Drive 9.5mm, 2.5" HDD
PCI Bus Master Enhanced IDE
Supports Ultra DMA/33
Floppy Disk
Drive
12.7mm, 1.44MB (3-mode)
CD-ROM/DVD 12.7mm, 24X CD-ROM or 8X DVD
To Next Page
Loading...
Need help?
General