HP Pro 3330 User Manual

Front I/O and USB Panel Housing Assembly
Description Spare part number
Front I/O and USB assembly 668572-001
1. Prepare the computer for disassembly (Preparation for Disassembly on page 42).
2. Remove the access panel (
Access Panel on page 43)
3. Lay the computer on its side with the front facing toward you.
4. Remove the front bezel (
Front Bezel on page 45).
5. Unplug the three cables that connect the assembly to the system board. The assembly cables
connect to the following system board connectors:
●
F_AUDIO – yellow connector
●
F_USB1 – white connector
6. Remove the screw (1) that secures the housing to the chassis, and then slide the housing up (2).
Figure 7-31 Front I/O assembly removal
Front I/O and USB Panel Housing Assembly 73

HP Pro 3330 Specifications

General

Chipset	Intel H61 Express
Power Supply	300W
Processor	Intel Core i3-2120
Memory	Up to 8 GB DDR3-1333 SDRAM
Storage	500GB 7200 rpm SATA
Graphics	Integrated Intel HD Graphics
Operating System	Windows 7 Professional
Optical Drive	DVD Writer
Audio	Integrated High Definition Audio
Network	Integrated 10/100/1000 Ethernet
Ports	6 USB 2.0, 1 VGA, 1 RJ-45