2-8
Status Pages
MAC Table
MAC Table
The MAC Table displays the MAC addresses associated with incoming packets on each port. Entries
are kept until they are aged-out based on the MAC Table Aging Interval, which cannot be configured
and set to 300 seconds by default.
To display the MAC Table, click Status > MAC Table in the navigation pane.
Figure 2-6. MAC Table Page
Table 2-4. MAC Table Fields
■ Click the Refresh link above the page to re-display the page with current data from the switch.
Field Description
MAC Address The list of MAC addresses learned on a particular interface.
Source Port The source interface on which the particular MAC address has been learned.
CPU is a special source port used for internal management on the switch.
MAC Type Shows whether the MAC address is dynamically learned or whether this is a management address.