HP ProCurve 1810G User Manual

9-6
Diagnostics
Locator
Locator
The Locator LED is a special LED that enables locating the device physically. When enabling the Locate
setting via the Web interface, the Locate LED on the switch blinks for 30 minutes and then turns off.
To access this page, click Diagnostics > Locator in the navigation pane.
Figure 9-5. Locator Page
■ Select Locate and click Apply to cause the Locator LED on the switch to blink for 30 minutes.

HP ProCurve 1810G Specifications

General

Brand	HP
Model	ProCurve 1810G
Category	Switch
Language	English