Configuring Secure Shell (SSH)
Configuring the Switch for SSH Operation
Figure 7-13 shows how to check the results of the above commands.
l le
i
Lists the current SSH
authentication
configuration.
Shows the contents of
the public key file
downloaded with the
copy tftp command in
figure 7-12. In this
examp e, the fi
conta ns two client
public-keys.
Client Key Index Number
Figure 7-13. SSH Configuration and Client-Public-Key Listing From Figure 7-12
6. Use an SSH Client To Access the Switch
Test the SSH configuration on the switch to ensure that you have achieved the
level of SSH operation you want for the switch. If you have problems, refer to
"RADIUS-Related Problems" in the Troubleshooting chapter of the Manage
-
ment and Configuration Guide for your switch.
7-21
To Next Page
Loading...
Need help?
General