2-4
Getting Started
Initial Configuration
An example output from this command looks as follows:
Updating Services Module Software
The Services Module maintains a repository of the software images that are
downloaded to it. The installation of software depends on the image type.
There are four image types:
■ Service image
■ CF Service image
■ Product image
■ Tools image
The Service, CF Service, and product images are containers for full OS
installations, and are referred to as OS images. These images are generally
large in size, typically greater than 200MB. The OS images don't change
frequently and are usually only used for recovery or major version updates or
to fix major OS problems.
Tools images, used to update the Service and CF tools, and to resolve minor
OS problems, are much smaller, usually 1-5MB. They change more frequently
and contain incremental updates.
There are two installation commands:
■ Install
■ Update
The install command is used for new installations of an OS image. Before a
new OS can be installed, the existing OS must be removed by using the
uninstall command. In addition, the product must also be uninstalled.
Status and Counters - Services Module C Status
HP Services zl Module J9154A
Versions : A.01.06, B.01.03
Current status : running
Description Version Status
--------------- ------------------- ---------
Services zl Module B.01.03 running
Application J0000 0.5 licensed
zlSM .book Page 4 T hursday, January 29, 2009 11:53 AM
To Next Page
Loading...
Need help?
General