HP ProLiant ML310 User Manual

BConfiguring storage server for
Webaccess(optional)
SettingupanInternetconnection
Before running Windows 2003 R2 operating system upd ates, you must set up an Internet connection for
the storage server. There are two m ethods for configuring an Internet connection:
• Internet Explorer to use automatic c onfiguration
• Internet Explorer to use a proxy server
To configure Internet Explorer to use automatic configuration
1. On the To ols menu in Internet Explorer, click Internet Options,clicktheConnections tab, and
then click LAN Settings.
2. Under Automatic Configu ration , click either the Automatically detect settings or Use automatic
configuration sc ript check box.
Figure 27 Automatic configuration settings
3. Click OK to close the LAN Settings dialog box.
4. Click OK again to close the Internet O ptions dialog box.
To configure Internet Explorer to use a proxy ser ver
1. On the To ols menu in Internet Explorer, click Internet Options,clicktheConnections tab, and
then click LAN Settings.
2. Under Proxy server,clicktheUse a proxy server for your LAN check box.
Figure 28 Proxy server settings
3. In the Address box, t ype the network name or IP address of the proxy server.
4. In the Port box, type the port number that is used by the proxy server for client connections
(for example, 8080).
HP ProLiant ML310 Storage Server
103

HP ProLiant ML310 Specifications

General

Brand	HP
Model	ProLiant ML310
Category	Server
Language	English